How do I find a Blud suspension fluid for my ATV, UTV or Snow shock?
- Start with your shock maker’s or tuner’s exact fluid specification. Use the Blud ATV / UTV / Snow Suspension Cross-Reference to screen a Blud option by viscosity and OEM recommendation.
- OEM suppliers include Fox™, KYB™, Walker Evans™ and Showa™. The supplier and fluid vary by model, year and trim.
- Read both cSt columns. Use this Blud selects one grade; when both values are available, 100°C is weighted twice as much as 40°C.
- A † flags historical, conditional or weaker evidence, or an estimated value that was not measured. A ‡ pick is matched by the weight or grade (light, medium, heavy) named on the label only; that manufacturer does not publish viscosity (cSt) data. A blank means a value was not established—not zero, not an invitation to guess. Confirm suitability before switching.
Take the guesswork out of shock-fluid selection. This cross-reference puts published viscosity numbers and a Blud starting point together. Match your specified oil, compare the data and confirm the application before pouring.
01Who supplies the OEM shocks?
The vehicle brand on the hood may not be the shock manufacturer. Use these reported supplier leads to find the right service information—not as a fitment or fluid-approval list.
| Vehicle brand / type | Supplier leads | What to verify |
|---|---|---|
| Polaris™ UTV / Snow | Walker Evans™ / Fox™ | Check the actual shock and trim; one Polaris™ badge does not mean one fluid. |
| Polaris™ ATV | Walker Evans™ on selected performance models | Do not extend this to every Sportsman™ or other ATV. |
| Can-Am™ UTV / ATV | Fox™ / KYB™ / Showa™ by model | Match the shock’s service specification, not merely the vehicle maker. |
| Honda™ UTV | Showa™ / Fox™ by trim | Standard and electronically controlled shock packages can differ. |
| Honda™ ATV | Supplier not confirmed in this overview | Showa™ is a research lead, not a verified fitment claim. |
| Yamaha™ UTV | Fox™ on selected RMAX™ models | Verify the model year and suspension package. |
| Yamaha™ ATV | Supplier not confirmed in this overview | KYB™ is a research lead, not a verified fitment claim. |
| Ski-Doo™ / Lynx™ Snow | KYB™ | Identify the exact shock and the fluid named in its service procedure. |
| Arctic Cat™ Snow | Fox™ / Arctic Cat™ IFP units | Do not infer the formulation of an Arctic Cat™ bottled oil from the shock brand. |
Supplier overview: OEM Suspension Suppliers and Fluids, pp. 1–2. These are reported supplier leads, not independently verified specifications for every current trim. Equipment varies by model, year and package. Unconfirmed ATV assignments remain unconfirmed.
Record the vehicle model/year/trim, shock brand/model and specified fluid part number. If any of those is missing, get the service information before selecting a replacement.
02Compare cSt, not just “weight”
A bottle marked 5W is not a universal thickness standard for suspension oil. Fork-oil weights are not standardized between brands and are not SAE grades. One brand’s 5W can differ from another brand’s 5W. Compare kinematic viscosity in centistokes (cSt) instead.
Use both temperatures. A close 40°C match can still differ at 100°C, changing the viscosity comparison as the oil warms. The chart weights the 100°C difference twice as much as the 40°C difference when both are published. That is a screening method, not a damping test, an operating-temperature claim or a compatibility approval.
03How to read the cross-reference
- 1Find the exact oil. Match the brand, product name and part number in your manual or tuner’s specification. A generic Fox™ or KYB™ reference does not identify every oil bearing that brand.
- 2Read 40°C and 100°C. These are published kinematic-viscosity values in cSt. The →40 and →100 columns show the nearest Blud grade at each temperature separately.
- 3Use the final column. Use this Blud is the chart’s single-grade screening recommendation. It considers both temperatures when available, with 100°C weighted 2×. It is not a blend recipe or a statement that your shock runs at 100°C.
- 4Check the evidence. Read the †, blank cells, row ID and source notes. With only 40°C data, the suggestion is a 40°C-only screen. With no 40°C value, the chart matches by the weight or grade named on the label (marked ‡) or, if the name carries no weight, lists N/A rather than inventing a match.
- 5Confirm, then service. Have the unit maker or tuner confirm fluid and seal requirements. Follow the exact volume, bleeding procedure and gas-charge specification for that shock.
One row, read from left to right
| Their oil / source ID | 40°C cSt | →40 | 100°C cSt | →100 | Use this Blud |
|---|---|---|---|---|---|
| KYB™ K2C / K2-S reference † [K2] | 11.3 | 3W | 4.0 | 2.5W | 2.5W |
The separate-temperature arrows differ; the final column gives one grade under the chart’s two-temperature rule. † This is a conditional historical-name reference, not proof of a fill specification for every KYB™ shock or an XPS™ product.
- † Historical, conditional or weaker evidence, or an estimated value (not measured). Check the Sources notes for the exact product, mapping and conflicting values. A reported equivalence is not a laboratory measurement of every OEM-labelled bottle.
- Blank temperature cell. No defensible value was established in the reviewed sources. Do not average, estimate or copy a number from a similarly named product.
- ‡ Label-weight match. Matched by the weight or grade (light, medium, heavy) named on the label only; this manufacturer does not publish viscosity (cSt) data.
- N/A / specialty. No numerical substitute is recommended for that row, or the product has a separate role such as air-sleeve lubrication. Fork / MTB comparison rows are not established ATV / UTV / Snow shock fills.
04Blud suspension fluids: measured data
All Blud suspension fluids are 100% synthetic. Blud Lubricants measured numbers, confirmed with independent testing. Compare these figures with the exact fluid your unit specifies, not just its nominal weight.
| Blud product | cSt @ 40°C | cSt @ 100°C | VI |
|---|---|---|---|
| Pro Series 2.5W | 8.75 | 3.84 | 455 |
| Pro Series 3W | 13.85 | 5.51 | 419 |
| Blud 4W High VI | 16.00 | 4.90 | 267 |
| Pro Series 5W | 19.02 | 5.09 | 219 |
| Euro Blud 7W High VI | 18.32 | 5.98 | 318 |
| Pro Series 10W | 26.53 | 7.05 | 249 |
| Pro Series 20W | 61.57 | 11.69 | 189 |
Source: Blud suspension-fluid data sheet and confirmed 100°C corrections. VI is calculated from the 40°C and 100°C viscosities; displayed viscosities are rounded. VI describes viscosity–temperature behavior, not resistance to permanent shear or guaranteed fade-free damping.
05Important notes before you switch
The Blud ATV / UTV / Snow Suspension Cross-Reference shows which Blud product to use in place of a competitor’s product, where a recommendation is listed, based on competitors’ published viscosity data. It is a starting point—not a claim of identical formulation, exact equivalence, OEM approval or guaranteed suitability.
Competitor values come from third-party published compilations and comparison tables, supported by technical or safety data where available. Historical values may differ from current formulations.
- Fork-weight note. Fork-oil weights are not standardized between brands and are not SAE grades. Compare cSt at 40°C and 100°C, not the number on the bottle.
- Blend note. Blud damping-fluid grades may be blended when Blud Technical recommends it. Do not assume specialty bath oils or air-spring lubricants are included. This chart recommends one grade, not a blend. Do not average cSt to invent a recipe. Mixing with other brands is unconfirmed; drain fully before switching.
- Compatibility note. Similar viscosity alone does not establish compatibility. Confirm with the unit maker or tuner that the Blud product meets the unit’s fluid and seal requirements. Follow the specified amount, bleeding procedure and service interval.
- Pressurized-shock safety. Never open a shock while it is pressurized. Use the maker’s service procedure or a qualified suspension shop for safe depressurization, bleeding and the specified gas recharge.
06FAQ
No. Match the exact shock, specified fluid and part number—not just the supplier.
No defensible value was established at that temperature. Do not substitute another oil’s data. Where the maker publishes no cSt but names a weight or grade on the label, the Use this Blud pick is the matching Blud grade, marked ‡.
No. It means this chart gives no defensible recommendation. Ask Blud Technical or the unit maker.
Vehicle model/year/trim, shock model, specified fluid/part number and any published 40°C / 100°C cSt values.
Competitor brand names marked ™ are trademarks of their respective owners. Their use identifies the referenced products and equipment; no affiliation or endorsement is implied.
USE THE FINDER GET THE ATV / UTV / Snow CHART SHOP BLUD SUSPENSION FLUIDS

