Tap a topic to find your oil, view product data or download a guide.

01Engine & Gear Oil FinderSearch your bike, ATV, UTV or sled

Powersports Viscosity Finder

Find suggested oil viscosities for dirt bikes, road bikes, ATVs, UTVs and snowmobiles, with the matching Blud engine oil. How to read this chart

This chart shows which Blud oil to use for each machine, based on OEM published recommendations; Blud picks are matched by viscosity. UTV oil requirements vary. Follow your owner’s manual.

    Clutch Rx (Scorpion): SAE 10W-40 · SAE 15W-50. Designed for extreme clutch loads · wet-clutch problem-solver.

    These are suggested viscosities for typical use. Always confirm the correct grade in your OEM owner’s manual. All Blud moto oils are formulated for JASO specs. 2-stroke injection oils are not SAE crankcase grades — never mix 2T and 4T. Questions: Blud Technical, info@bludlubricants.com.

    Download the PDF chart

    02Motorcycle SuspensionMatch your fork or shock oil

    Motorcycle Suspension Cross-Reference Finder

    Compare popular fork and shock oils, such as Motul™, Fox™ and others, with the closest Blud Pro Series fluid, matched by viscosity at 40°C and 100°C. How to read this chart

    These charts show which Blud product to use in place of a competitor’s product, based on competitors’ published data. Cross-references use published TDS viscosity data.

      Specialty, not damper fill: 20WT FGR 101.10 / 13.89 cSt, VI 139 (Fox™ Gold bath; special order, 55 gal minimum). Float Fluid 337.30 / 39.83 cSt, VI 170 (Fox™ air-sleeve).

      Matches are by published cSt as a starting point; confirm with the unit maker or tuner that the fluid meets its fluid and seal requirements. Similar viscosity alone does not establish compatibility. →40 / →100 and Use this Blud are screening references, not exact equivalence or guaranteed suitability. Use this Blud is a single factory grade, not a mix recipe. Blud numbers are Blud Lubricants measured values, confirmed with independent testing. Competitor brand names are trademarks of their respective owners. Questions: Blud Technical, info@bludlubricants.com.

      Download the PDF chart

      03ATV / UTV / Snow SuspensionSearch by brand or part number

      ATV / UTV / Snow Suspension Finder

      Look up ATV, UTV and snowmobile shock and fork fluid references by brand, part number or source ID, and see the closest Blud suspension fluid. How to read this chart

      These charts show which Blud product to use in place of a competitor’s product, based on competitors’ published data. — means no published value was found. ‡ = matched by the weight or grade named on the label only (no published cSt). † = conditional or historical reference, or an estimated value, not measured; exact OEM identities may remain unverified.

        FOX™ identity / related-fork limits F6 is a conditional MTB 4WT reference, NOT ULF / Polaris / XPS™. KHL15-10, 01M, SS-05, SS-47 and A15-00 are FORK comparisons only, not established powersports shock fills.

        SS-25 conflict checked against maker SDS Current SS-25 = 11.27 at 40°C. The 15.88 figure belongs to A15-00 (S5), not SS-25. Historical SS-25 Stock Shock remains separate. † = historical, conditional or weaker evidence; see Sources.

        Reported supplier guide† / safety FOX™: UTV / ATV / snow. KYB™: BRP snow / some Can-Am. Walker Evans™: Polaris. Showa™: Honda / some Can-Am. Verify trim, year and manual. Never open a pressurized shock; use a qualified shop.

        Matches are by published cSt as a starting point; confirm with the unit maker or tuner that the fluid meets its fluid and seal requirements. Similar viscosity alone does not establish compatibility. →40 / →100 and Use this Blud are screening references, not exact equivalence or guaranteed suitability. Use this Blud is a single factory grade, not a mix recipe. Blud numbers are Blud Lubricants measured values, confirmed with independent testing. Competitor brand names are trademarks of their respective owners. Source IDs in brackets match the companion sources list. If you find an error, please contact Blud Technical at info@bludlubricants.com.

        Download the PDF chart

        04Product Data2027 Technical Data Sheet (PDF)

        Blud Lubricants Technical Data

        Technical Data Sheet for Blud Lubricants products.

        Blud Lubricants TDS

        05Printable GuidesOil change & Suspension 101
        06Why Choose Blud?PDS-C oxidation results

        Visit the Blud Blog for how-to’s, tech articles and stories →

        Newsletter

        Sign up for news and updates from Blud Lubricants.